Add new / Edit IP address
Use this dialog box to add an additional IP address to the interface.
Navigation: NETWORK > Configuration > Interfaces > IP addresses > Add new IP address.
|Add new / Edit IP address
|New IP addresses are turned on by default. Clear the option to create an inactive IP address.
|whether this IP address is assigned a static IP address (Static IPv4), or an IP address assigned via DHCP (DHCP IPv4).
|the additional IP address for this interface.
|the subnet mask for the IP address
|If traffic from this IP address needs to go through a gateway, select User defined, and either enter it into the box provided, or choose it from the list. Else, leave None selected.
|This parameter is only displayed if a User defined Gateway is configured. If multiple gateways are configured and used, enter the minimum bandwidth used to load balance traffic among connections. If a single gateway is configured, load balancing isn't used so this parameter can remain set at 1. Select whether the configured value is in kilobits per second (kbps), or in megabits per second (Mbps).
|This parameter is only displayed if a User defined Gateway is configured. Select to turn on connection monitoring for this gateway.
|DHCP client hostname
|The DHCP device host name as specified by the DHCP server.
|A descriptive comment.