Firewall

Use this page to review and export the Smoothwall Firewall logs.

Navigation: Reports > Logs > Firewall.

   
Time

When the network connection was first detected.

Inbound interface

The network interface the connection came in through.

Outbound interface

The network interface, if any, the connection is routed to.

Source IP

The IP address of where the connection originated from. If source NAT was applied to this log entry, the IP address shown here is before the source NAT rule was applied.

Destination IP

The IP address, if any, of where the connection is routed to, taken from the packet header. If port forwarding was applied to this log entry, the IP address shown here is after the port forward rule was applied.

Protocol

The protocol and IP protocol number taken from packet header.

Source Port

The port number, if any, of where the connection originated from.

Destination Port

The port number, if any, of where the connection is routed to, taken from the packet header.

Rule

The Smoothwall Firewall, Smoothwall access, port forward, or advanced networking rule this connection matched. Clicking the rule name brings you to the relevant configuration page.

Action

Indicates whether this connection was accepted, dropped, or rejected. An entry of N/A is typically seen for audited traffic entries.

Read more

About the Smoothwall Firewall logs report

Things you can do here

Reviewing and exporting the Smoothwall Firewall logs

Watch the video

Simple Diagnostics

Something not right? .